manualshive.com logo in svg

Toshiba e-STUDIO GL-1010, Руководство администратора, Страница: 345 / 427

Поделиться
Скачать
Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 345

GL-10x0 Administrator’s Guide

323

Scan kit Internal Error (SK5)

Controller/copier interface issues. Restart both the 
controller and the copier. If the controller is not 
restored after restarting, recover the HDD. Refer to the 

Operator’s Guide

. If the controller is still not restored, 

contact your TOSHIBA authorized dealer for support.

Scan Kit Internal Error (SK6)

Scanning cannot be started due to the copier status, 
such as a misfeed in the document feeder or the 
feeder may be open. Make sure that the operation on 
the copier is set up properly and then try rescanning.

Scanner Memory full. Job is 
cancelled. 

Scanner memory is full and your request has not been 
accepted. Use TopAccess to confirm the job is in 
process. When all jobs have been completed, delete 
them from the queue. If the error persists, restart the 
controller. If this does not resolve the error, contact 
your TOSHIBA authorized dealer for support.

Select either Public or Private Scan. 
Private scan may require a 
password. Internal memory used is 
NN%. 

Verify that there are no active users. Run [SCAN] –
[A

DMINISTRATION

] – [D

ELETE

 F

ILES

] on TopAccess 

(administrator mode) and delete the Data Processing 
folder. Refer to the TopAccess Online help or the 
TopAccess chapter of the 

Administrator’s Guide

. If the 

controller is not restored, contact your TOSHIBA 
authorized dealer for support.

Select either Public or Private Scan. 
Private scan may require a 
password. Shared memory used is 
NN%. 

Verify that there are no active users. Run [SCAN] –
[A

DMINISTRATION

] – [D

ELETE

 F

ILES

] on TopAccess 

(administrator mode) and delete the Shared File folder 
or TWAIN Data folder. Refer to the TopAccess Online 
help or the TopAccess chapter of the 

Administrator’s 

Guide

. If the controller is not restored, contact your 

TOSHIBA authorized dealer for support.

Scan-Related LCD Messages

Message

Corrective Action

Содержание e-STUDIO GL-1010












































































































































































































































































































































































































































Отзывы:

Нет отзывов