Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 14

Страница: 14 / 427

GL-10x0 Administrator’s Guide

Private Printing

You can send a sensitive or confidential document to the copier and then

release it for printing by entering a private Document Identification

Number (DIN) from the copier Liquid Crystal Display (LCD) touch screen.

Document Management

You can use the TopAccessComposer web-based utility to view, edit,

merge, and store documents on the controller. You can then print your

document using a web browser.

Queue-based or NDPS Novell Printing

The controller

supports Novell’s traditional queue-based print services

and can function as either a network printer or a print server.

Additionally, the TOSHIBA Novell Distributed Printing Services (NDPS)

Gateway, distributed on the

e-STUDIO Admin’s Client CD-ROM

, allows the

controller

to emulate an NDPS-aware printer. NDPS is available on the

NetWare 4.11, NetWare 4.2, NetWare 5.x, and NetWare 6.x releases. It

moves away from the queue-based paradigm allowing you to more quickly

and easily establish Novell print services.

Network Scan Support

The Network Scan feature allows you to turn a hard copy document into

an electronic file. Once captured, you can store it on the network, retrieve

it from TWAIN-compliant applications, upload it to an FTP server, or

distribute it via e-mail.
Using the copier control panel or the TopAccess web-based utility, you

can configure scan and distribution parameters, including scan settings,

transfer type, and distribution locations. Additionally, you can use

TopAccess to create scan templates that contain all required scan and

distribution information. When downloaded to the copier, these templates

provide a way to perform one-touch scan and send tasks from the copier

control panel.
Another capability provided by the Network Scan feature is sending a

scanned file as an Internet Fax job (iFax).

Network Faxing Support (Optional, GL1010 only)

The controller Network Fax kit allows you to send faxes from the digital

copier. This feature-rich option kit provides address book and custom

cover page support, in addition to the ability to schedule faxes and print

Содержание e-STUDIO GL-1010












































































































































































































































































































































































































































Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы:

Toshiba e-STUDIO GL-1010, Руководство администратора, Страница: 14 / 427

Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы: