Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 260

Страница: 260 / 427

238

GL-10x0 Administrator’s Guide

Creating and Using Department Codes

The Electronic Document Processing System uses counters to keep track

of the number of pages printed, copied, and scanned. It displays these

statistics as totals or by department.
Each department has a name and a corresponding five-digit code. With

the department code feature enabled, if you enter a department code

when using the printer drivers, the controller adds the number of printed

pages to the counter for that department. When no department codes

exist, the system assigns all prints, copies etc. to a default department

called UNDEFINED.
If the department code feature is enabled, the administrator may enable

department code enforcement from TopAccess. If the department code

feature is disabled, the department code enforcement option is

unavailable.
When enabled, this option requires all users to enter a valid department

code to print to the controller.

Note: There is no enforcement of department codes in Unix filters,

Macintosh PPD files, or raw print jobs.

Enabling Department Codes

You enable or disable the department code feature from the copier control

panel. You cannot enable department codes until the administrator has

created the master department code. The administrator can use

TopAccess to see whether the department code feature is enabled.

Enabling Department Code Enforcement

Click the Administration tab.

Click the Device submenu.

From the

Department Code Enforcement

drop-down menu, click

Enable

Click

Save

Creating the Master Department Code

You create department codes from the copier control panel or using

TopAccess. The first department code must be created through the copier

control panel. It becomes the master department code. The person in

possession of this code has access to all other codes.

Содержание e-STUDIO GL-1010












































































































































































































































































































































































































































Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы:

Toshiba e-STUDIO GL-1010, Руководство администратора, Страница: 260 / 427

Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы: