Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 22

Страница: 22 / 427

xviii

GL-10x0 Administrator’s Guide

Software CD-ROM Contents

The controller ships with three software CD-ROMs:

e-STUDIO Admin’s Client CD-ROM

This CD-ROM includes the following Administration tools and

applications:

TOSHIBA’s NDPS Gateway that enables Novell NDPS printing to the

controller.

Unix filters for printing from Sun Solaris, HP-UX, IBM AIX,

OpenUnix/SCO, and Linux operating systems.

MIB folder.

e-STUDIO Client CD-ROM

This CD-ROM includes the following client drivers and utilities:

TopAccessDocMon, the Windows-based job monitoring utility.

PCL6 printer drivers for the GL-1010 and GL-1020 controllers

through Windows 98/Me/2000, Windows NT, and Windows XP-based

workstations.

PostScript level 3 printer drivers for the GL-1010 and GL-1020

controllers through Windows 98/Me/2000, Windows NT, and

Windows XP-based workstations.

AGFA Font Manager and font collection.

Macintosh PPD files, which extends the LaserWriter driver to support

printing to the controller from Macintosh workstations.

e-STUDIO Recovery CD-ROM

This CD-ROM includes the following controller software:

The Operating System software, which enables you to recover the

controller’s embedded Operating System in the event the internal

hard drive or files become corrupted or destroyed. Additionally, if you

have a previous version of the software installed, you can use this

CD-ROM to perform a version upgrade.

The controller software, which enables you to install or restore the

baseline software version on the controller.

Содержание e-STUDIO GL-1010












































































































































































































































































































































































































































Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы:

Toshiba e-STUDIO GL-1010, Руководство администратора, Страница: 22 / 427

Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы: