Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 216

Страница: 216 / 427

194

GL-10x0 Administrator’s Guide

When

dfactorydefault=on

, only this option is sent to the printer which

reverts to the factory defaults. When other options are set

(

dfactorydefault

is off or not set), then those options are sent to the

printer.
If the option values specified are outside the indicated limits for dpitch,

dpointsize, dorientation, dformlines, and dsymbolset, then their

respective default values are used.
Example: The command to set the default factory pitch to 10 is

lp –o

dpitch=10 <filename>

Orientation

The following orientation options are available.

If this option is not specified, the default value is used.
Example: The command to specify landscape orientation is

lp –o

landscape <filename>

dorientation= <

value>

Set the orientation to <

value

0 – Portrait orientation is used.
1 – Landscape orientation is used.
The default is 0.

dformlines= <

value>

Set the number of form lines to <

value>

. The range available is

5.00

128.00

. The default is

12.00

dsymbolset= <

value>

Set the symbol set to <

value>

. The range available is

999

. The

default is

341

(PC-8).

dfactorydefault= <

value>

Set the factory default settings for pitch, point size, orientation,
formlines, and symbolset.
OFF or off: <

value

>=0. Factory default settings are not used.

ON or on: <

value

>=1. Factory default settings are used.

Orientation Options

Option Value

Description

portrait

Prints the document in portrait orientation.

landscape

Prints the document in landscape orientation.

Factory Default Setting Options

Option Value

Description

Содержание e-STUDIO GL-1010












































































































































































































































































































































































































































Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы:

Toshiba e-STUDIO GL-1010, Руководство администратора, Страница: 216 / 427

Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы: