Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 252

Страница: 252 / 427

230

GL-10x0 Administrator’s Guide

Installing Windows Software

The client software includes the TopAccessDocMon print job monitoring

utility, printer drivers for PCL and PostScript (PS), the GL TWAIN Driver,

and the AGFA Font Manager.

Considerations and Limitations

The TopAccessDocMon utility monitors only GL-1020, GL-1010, and

SC-2 devices. It does not support any third party printer drivers.

TopAccessDocMon cannot locate or interrogate the controller if it has

been set up as a NetWare NDPS printer or NPRINTER.

You must install a printer driver and map it to the controller to access

it using TopAccessDocMon.

You can view all jobs in the print queue, including controller-resident

jobs, but can only delete your own jobs.

Prerequisites

Make sure that the client workstation meets the following minimum

requirements:

Windows

Novell Client v3.4 or higher and Client Service Pack 1 are

required to run IPX-based SNMP access and Novell printing.

The Microsoft Client for NetWare can replace the Novell Client

except for NDPS printers.

Windows Me

Novell Client v3.4 or higher is required to run IPX-based SNMP

access and Novell printing.

The Microsoft Client for NetWare can replace the Novell Client

except for NDPS printers.

Windows NT 4.0

Microsoft Service Pack 6A or higher

Novell Client v4.9 SP1a or higher with Z.E.N works Starter Pack

and Service Pack 1 are required to run IPX-based SNMP access

and Novell printing.

The Microsoft Client for NetWare can replace the Novell Client

except for NDPS printers.

Содержание e-STUDIO GL-1010












































































































































































































































































































































































































































Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы:

Toshiba e-STUDIO GL-1010, Руководство администратора, Страница: 252 / 427

Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы: