Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 253

Страница: 253 / 427

GL-10x0 Administrator’s Guide

231

Windows 2000

Microsoft Windows 2000 Service Pack 1 or higher

Novell Client v4.9 SP1a or higher with Z.E.N works Starter Pack

is required to run IPX-based SNMP access and Novell printing.

The Microsoft Client for NetWare can replace the Novell Client

except for NDPS printers.

Windows XP SP2

Novell Client v4.9 SP1a or higher is required to run IPX-based

SNMP access and Novell printing.

The Microsoft Client for NetWare can replace the Novell Client

except for NDPS printers.

At least 60 MB free disk space on the destination drive; 120 MB for

optimal performance.

To ensure successful implementation:

Close all Windows applications before installing the new software.
If an old version of TOSHIBA client software is installed, right-click

the document monitoring application icon in the system tray, then

choose

Exit

from the short-cut menu.

If your workstation had a previous version of TOSHIBA software

installed, the setup program detects it and opens the Client Setup

Maintenance Program. Click

Remove

to delete all previously installed

components.
You can also use the Windows Add/Remove Programs option,

accessible from the Windows Control Panel, to delete the old software.

Client Setup

Insert the

e-STUDIO Client CD-ROM

into the workstation CD-ROM

drive. If

Auto-Run

is enabled, the InstallShield Setup Wizard starts

automatically.
Otherwise, choose

Run

from the Start menu and then locate the

Setup.exe

file on the CD-ROM. Click

to launch the setup

program.

Follow the Setup Wizard through the installation steps. When

prompted:

Enter a destination directory or accept the default location.

Select the drivers and fonts to install.

Содержание e-STUDIO GL-1010












































































































































































































































































































































































































































Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы:

Toshiba e-STUDIO GL-1010, Руководство администратора, Страница: 253 / 427

Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы: