manualshive.com logo in svg

Toshiba e-STUDIO GL-1010, Руководство администратора, Страница: 68 / 427

Поделиться
Скачать
Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 68

46

GL-10x0 Administrator’s Guide

If this screen does not open, the controller did not boot from the CD 

successfully.

5

Press 

OK

 to continue. The controller begins copying the software from 

the CD to the hard drive. This process takes approximately five 

minutes, during which time the touch screen displays the 

OS Update 

Progress

 screen.

6

When the system update process completes, the CD-ROM is ejected 

and the touch screen displays 

Press the START key to start 

controller

.

7

Remove the CD-ROM from the drive and press the 

START

 button. You 

must

 remove the CD-ROM before the controller can boot up.

8

After boot up, an initialization process begins. This takes 

approximately 10 minutes. During that time, the touch screen 

displays 

Processing Controller update, don’t switch off

.

9

When communications with the copier resume, a test page prints out 

on the copier and the front panel becomes operational again. The 

controller software version printed on the test page should match the 

update version. If so, the system update has completed successfully.
If you experience problems during the update process, or if the 

system does not come back online after the update process 

completes, contact your Toshiba authorized dealer for support.

Update OS From Control Panel

1

Press the 

PRINTER/NETWORK

 hard key on the copier control panel.

2

Press the 

ADMIN

 tab.

3

Log on to perform administrative functions.

Содержание e-STUDIO GL-1010












































































































































































































































































































































































































































Отзывы:

Нет отзывов