manualshive.com logo in svg

Toshiba e-STUDIO GL-1010, Руководство администратора, Страница: 346 / 427

Поделиться
Скачать
Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 346

324

 GL-10x0 Administrator’s Guide

LED Indicators

Copier Control Panel

When the 

PRINTER/NETWORK

 LED is on, it indicates that the copier is in 

Printer/Network mode. 

Corrupt Controller Software

Controller Operating System Corrupt

Problem Description

The controller operating system has failed to start or has malfunctioned.
Corrective Action
Use the e-STUDIO Recovery CD-ROM to restore the required controller 

system files. Refer to the field service guide for instructions.

OS Update Does Not Boot Off CD

Problem Description

During an OS update from CD-ROM, the OS Update Version screen fails 

to appear or the LCD touch screen displays the 

Starting Controller, 

Please Wait

 or 

Shut-down in Progress, Please Wait

 message for 

over ten minutes. The CD-ROM may be damaged or incorrectly inserted. 

Other possible reasons are more serious and may require contacting your 

TOSHIBA authorized dealer for support.

Corrective Action

1

Make sure that the CD-ROM has been inserted into the drive with the 

label side up (showing).

2

Check that you can read the CD-ROM from another drive. If the CD-

ROM is corrupt or damaged, contact your TOSHIBA authorized dealer 

for support.

Содержание e-STUDIO GL-1010












































































































































































































































































































































































































































Отзывы:

Нет отзывов