Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 427

Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 3

The official name of Windows Me is Microsoft Windows Me Operating System.

The official name of Windows 2000 is Microsoft Windows 2000 Operating System.

The official name of Windows XP is Microsoft Windows XP Operating System.

Microsoft, Windows, Windows NT, and the brand names and product names of other Microsoft products are trademarks of Microsoft
Corporation in the US and other countries.

Apple, AppleTalk, Macintosh, Mac, TrueType and LaserWriter are trademarks of Apple Computer Inc. in the US and other countries.

PostScript is a trademark of Adobe Systems Incorporated.

Netscape is a trademark of Netscape Communications Corporation.

IBM, AT and AIX are trademarks of International Business Machines Corporation.

Novell, NetWare, and NDS are trademarks of Novell, Inc.

3Com is a trademark of 3Com Corporation.

The Bluetooth trademark is owned by Bluetooth SIG, Inc.

Other company names and product names in this manual are the trademarks of their respective companies.

The technology of Dartcom is used in the scanning process.

COPYRIGHT:

Copyright

©

1999-2007 TOSHIBA TEC Corporation. All Rights Reserved.

«
1
2
3
4
5
...
»

Содержание e-STUDIO GL-1010












































































































































































































































































































































































































































Отзывы:

Нет отзывов