RR Mechatronics STARRSED RS Скачать руководство пользователя страница 28

Страница: 28 / 259

2.3 - Used reagents

NOTE:

The latest version of the Material Safety Data Sheet (MSDS) of the used reagents can

be found on our web site rrmechatronics.com

2.3.1 - Starrsed Rinse solution

Starrsed Rinse solution is a dedicated IVD product, developed exclusively for automatic rinsing of the

Westergren pipettes in Starrsed ESR analyzers.

This reagent is supplied in a 20- liter container (QRR 010934).

2.3.2 - Starrsed Saline

Starrsed Saline is a dedicated IVD product, developed exclusively for the automatic cleaning of the needle

and fill-nozzle assembly in Starrsed ESR analyzers. Approximately 1 ml of saline is used for each sample.

This reagent is supplied in a 5-liter container (QRR 010933).

2.3.3 - Starrsed Diluent

Starrsed Diluent is a dedicated IVD product, developed exclusively for the automatic dilution of blood

samples in Starrsed ESR analyzers.

▪

Approximately 0.5 ml Diluent is used for each sample.

▪

Approximately 2.5 ml is used for one Prime cycle.

This reagent is supplied in a 5-liter container (QRR 010931).

The solution should be discarded if it becomes turbid.

If onboard containers are used:

If the diluent does become turbid, clean the diluent bottle thoroughly with 50 ml bleach (containing

approximately 5% Na-hypochlorite) and 950 ml de-ionized water (=5% solution). Make sure that the

container is thoroughly rinsed with de-ionized water after cleaning.

If large cubitainers are used:

Replace the Diluent cubitainer.

2.3.4 - Deionized water

After each aspiration, the fill nozzle is flushed with de-ionized water. The water container must be filled up

when empty.

Add one or two drops of Starrsed Saline to the deionized water to avoid

Reagent alarm

Instrument description

MRN-071-2-EN version 7.02 Starrsed RS

Содержание STARRSED RS




































































































































































































































































Результаты поиска

Содержание STARRSED RS

Отзывы:

Похожие инструкции для STARRSED RS

Бренды по названию

Популярные бренды

RR Mechatronics STARRSED RS, Руководство пользователя

Результаты поиска

Содержание STARRSED RS

Отзывы:

Похожие инструкции для STARRSED RS

Бренды по названию

Популярные бренды