RR Mechatronics STARRSED RS Скачать руководство пользователя страница 92

Страница: 92 / 259

If the QC sample is linked with a Lab ID, the sample will be requested at LIMS with the Lab ID.

If the QC sample is used with the original Starrsed Control sample ID, the sample will be requested at

LIMS with the Starrsed Control sample ID.

▪

OFF (=Default setting): All QC samples will be processed without requesting at LIMS.

Send QC result to LIMS

▪

ON: QC results are send to the LIMS as a standard ESR result.

If the QC sample is linked with a Lab ID, the result will be send to LIMS with the Lab ID.

If the QC sample is used with the original Starrsed Control sample ID, the result will be send to LIMS

with the Starrsed Control sample ID.

Note: When the MECHATRONICS-01 or MECHATRONICS-02 protocols are used, the "Sample code" (or

"Sample type") flag is set accordingly to mark the QC samples.

▪

OFF (=Default setting): Results will not be send to LIMS, data is only available on the Starrsed RS.

Automatically remove linked QC ID after result

▪

ON (=Default setting):The link between Starrsed Control Sample ID and Lab ID will be deleted after a

useable result has been reported for this particular lab ID. For each QC sample a new link must be

created. This link will stay active if there is no result or a general ESR error is generated. This setting is

useful when the lab issues a new and unique Lab ID for every QC sample.

When ready press

Save settings

before you continue.

6.7 - Service screen

Starrsed program

MRN-071-2-EN version 7.02 Starrsed RS

Содержание STARRSED RS




































































































































































































































































Результаты поиска

Содержание STARRSED RS

Отзывы:

Похожие инструкции для STARRSED RS

Бренды по названию

Популярные бренды

RR Mechatronics STARRSED RS, Руководство пользователя

Результаты поиска

Содержание STARRSED RS

Отзывы:

Похожие инструкции для STARRSED RS

Бренды по названию

Популярные бренды