RR Mechatronics STARRSED RS Скачать руководство пользователя страница 82

Страница: 82 / 259

6.6.2 - Carousel control

Carousel position

This display presents the position of the carousel for the Measure station position, Rinse station position and

the Fill station position.

Forward and backward movement of the carousel

With this function the carousel can be moved one position backwards and forwards.

Warning

: Only for trained personnel. When this function is used, the built-in safety functions are not

active, be careful.

Go to Rinse position

Enter a pipette number; the carousel will then turn to the stop position, which is always the Rinse station.

Set Rinse position

The ESR analyser unit has a self-encoding pipette position system.

If an intermittent 'position error' is displayed the position must be entered manually.

Pipette flow test

Warning

: Pipettes must be empty, before starting this function.

Before the confirmation of the function the warning <Pipette data will be lost! > is displayed.

This is a useful function for checking the pipette position adjustment, vacuum adjustment and filling height

adjustment.

Each individual pipette is tested and results are sent to the printer.

Starrsed program

MRN-071-2-EN version 7.02 Starrsed RS

Содержание STARRSED RS




































































































































































































































































Результаты поиска

Содержание STARRSED RS

Отзывы:

Похожие инструкции для STARRSED RS

Бренды по названию

Популярные бренды

RR Mechatronics STARRSED RS, Руководство пользователя

Результаты поиска

Содержание STARRSED RS

Отзывы:

Похожие инструкции для STARRSED RS

Бренды по названию

Популярные бренды