RR Mechatronics STARRSED RS Скачать руководство пользователя страница 120

Страница: 120 / 259

Limit error

Error

One of the following limits are out of the setting

range:

•

ESR Time

•

Column height

•

Dilution

•

Bubbles on top

•

Hazy aspect

•

Temperature

9.4 - Limit error settings

When an option (at Limit error settings) is set to

YES

and this limit error occurs, results will be printed/send

to the LIMS. Together with the sedimentation time and dilution rate (which are still printed at the usual

position), the operator/analyst can see what caused the error and may or may not use the ESR values which

are preserved in the error message.

When an option is set to

and this limit error occurs, the fields for

30 min ESR, 60 min ESR and the

temperature corrected ESR are filled with spaces and thus results are not printed/send to the LIMS.

The error message in the error field (column 10) indicates that at least one of the limits (ESR time, dilution

rate, column height, bubbles on top, hazy aspects and temperature) has been exceeded.

Description of the error message

L_err(hhh/www/ttt/ccc)

•

L_err

means it is a "limit error"

•

hhh

is the 30 minutes ESR

•

www

is the 60 minute ESR

•

ttt

is the temperature corrected 60 minute result

•

ccc

is the column height

Example of a limit error message:

•

L_err( 42/ 84/ 75/200) means 42 mm in the 30 minute method and temperature correction 75 with a

correct column height.

•

L_err(---/ 84/ 75/200) means 84 mm in the 60 minute method and temperature correction 75 with a

correct column height.

Note:

If limit error filters in the LIMS are not corresponding with the limit error settings on the instrument it

is possible that not all expected results are send to the LIMS.

Reporting

120

MRN-071-2-EN version 7.02 Starrsed RS

Содержание STARRSED RS




































































































































































































































































Результаты поиска

Содержание STARRSED RS

Отзывы:

Похожие инструкции для STARRSED RS

Бренды по названию

Популярные бренды

RR Mechatronics STARRSED RS, Руководство пользователя

Результаты поиска

Содержание STARRSED RS

Отзывы:

Похожие инструкции для STARRSED RS

Бренды по названию

Популярные бренды