Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 277 / 374

CTS-K6 Windows

Application CTSgo
1079.2001.01 21 E-3
6.3 GSM Autotest Dialog
After the first start, the CTSgo program is in the GSM autotest mode. The sequence control of the
autotest is in the stop mode at this point in time. If you wish to change settings for the autotest, you
should do it now. The individual menus and associated commands are described in the following
sections.
The autotest dialog comprises four main windows:
•
“Message” window where the progress of the tests is indicated. If required, user prompts can also
be displayed. So, for instance, the instruction to switch the mobile off and on again to initiate a
location update.
•
“Current Test” window where the currently performed autotest step is described.
•
Progress bars informing on the state of the current test and of the total test to allow the user to
estimate the remaining test time.
•
Result window for indicating the number of performed tests with a distinction made between tests
passed and tests failed.
The dialog also comprises a button for terminating the program.
In the status bar, the time and information on keyboard settings are displayed.
Fig.: CTSgo in GSM autotest mode