Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 156 / 374

Test Report Printout CTS55
1094.0006.55 10.2 E-5
MS Sensitivity
This table shows the transmit level of the CTS and the receive level measured by the mobile (RxLev).
The parameter receive quality (RxQual) is also listed here. The measurement is carried out with a
selectable transmit level of the mobile tester.
•
Input Level Transmit level from CTS.
•
RXLEV Input level measured by the mobile.
•
Tolerance Upper and lower tolerance levels for the measured levels.
•
RXQUAL Bit error rate of the receive signal as measured by the mobile.
•
Maximum Upper tolerance level of the bit error rate.
•
Evaluation If the result is within tolerance limits, "OK" will be output.
Otherwise, "fail" will be output.
Power Ramp
Here are the results of the power ramp measurement.
•
Standard Nominal power with which the telephone should be transmitting.
•
Average Power Average power of the mobile measured by the CTS.
•
Tolerance Upper and lower tolerance levels for the measured average power.
•
Ramp Indication at which part of the template the power ramp is out of
tolerance.
•
Evaluation If the result is within tolerance limits, "OK" will be entered,
otherwise, "fail" will be entered.
Phase/Frequency
Here are the results of the phase/frequency measurement.
•
Standard Nominal power with which the telephone should be transmitting.
•
Phase Error RMS
•
Phase Error Peak Measurement results measured by the CTS.
•
Frequency Error
•
Maximum Maxima for the measurements.
•
Evaluation If the result is within tolerance limits, "OK" will be entered,
otherwise, "fail" will be output.
Bit error measurement
Here are the results of the bit error measurement.
•
Input Level Transmit level from CTS.
•
Number of Frames Number of speech frames for which the BER is measured.
•
RBER Class II
•
RBER Class IB Measurement results measured by the CTS.
•
FER
•
Maximum Maxima for the measurements.
•
Evaluation If the result is within tolerance limits, "OK" will be entered,
otherwise, "fail" will be output.