Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 370 / 374

Windows

Application CTSgo CTS-K6
1079.2001.01 114 E-3
17 Other Features
17.1 Debugging
CTSgo can prepare a protocol for all the data transferred via the serial interface. To activate this
features, the command line for program call can be extended to “CTS_GO.EXE /SERPROT“.
To this end, add “/SERPROT” to the entry in the Destination field of the link. When Windows 95 / 98 /
NT is used, click on the program icon and select Properties via a popup menu using the right mouse
key.
Note:
Program icons of the start menu bar for Windows 95 / 98 / NT 4.0 are displayed when the Windows
directory is changed. Open the Profiles folder and then the Start Menu folder. Lower-level folders have
the same format as the Start menu bar. For more detailed information refer to the Windows manual.
As an alternative, Debug=1 can be entered in the [Remote] section of initialization file CTS_GO.INI
with the aid of an editor.
17.2 Demo Feature
CTSgo can simulate a measurement without a CTS being connected. Measured values are generated
in a random generator. To activate this feature, the command line for program call-up can be extended
to CTS_GO.EXE /DEMO.
As an alternative, Demo=1 can be entered in the [Remote] section of initialization file CTS_GO.INI.
17.3 Generate Code Feature
CTSgo can also save the command sequence to be sent to the CTS in the file GENERATE.IEE. To do
so, Generate Code=1 can be entered in the [Remote] section of initialization file CTS_GO.INI with the
aid of an editor.