Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 114 / 374

Description of the Menus CTS55
1094.0006.55 9.6 E-7
9.5 Auto Test Menus
9.5.1 Autotest Start Menu
Autotest Start Menu
This menu is displayed after the Autotest is activated.
On the lleft side of the menu the level chosen for the sensitivity and the BER measurement during the
test sequence is indicated.
Start
Pressing this key starts the testing in the selected mode.
MS Type Details
Pressing this key selects the MS Type Details Menu where the attenuation values across all three GSM
bands can be viewed.
Coupler
This key selects the way in which the mobile is connected to the CTS. If the key is set to "On", the input
output and attenuations of the selected mobile type will be considered in the measurements. If the key is
set to "off", no attenuation is considered and zero is used for both the Input and the Output attenuation.
MS Type MS Type
The two keys select the type of mobile to be tested together with the corresponding coupling attenuation
and the transmit level for the sensitivity and BER measurement. The keys are used to scroll up or down
the list of mobile types.
Config
This key will call the autotest config menu. From this menu the user can change Autotest specific
parameters.