Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 42 / 374

Getting Started With Autotest CTS55
1094.0006.55 3.4 E-7
3.2 Test of Mobile
.
DIGITAL RADIO TESTER CTS 55 1094.0006.55
MENU UP
MADE IN GERMANY
RF OUT 2 GSM
RF IN / OUT GSM
CAUTION
INPUT POWER LIMITED
50
50
2
DEF 3
GHI 1
ABC
5 6 4
8
ÜVW
7
STU
.
-
0
9
XYZ
S C RCL M
Step 1
Connect the N socket RF IN/OUT
of CTS with antenna connector of
mobile.
Make sure that the mobile is
provided with the required supply
voltage (charged battery or power
supply unit).
Home Menu
After the CTS is switched on the
Home Menu shown opposite
appears after a few seconds. The
instrument is now ready for
testing. Use the "Test Mode" key
to toggle between the Manual
Test, Autotest, Quicktest and
Module Test modes (select
"Autotest").
Press "Start" to go to the Main
Menu of the Autotest. With the
"Net Type" key the network type
can be selected and with the
"Config" key the configuration
menus can be reached.
---------------------------------------------------------------------------------
--------------------------------------------
Cheque card format
Plug-In-Format
CRT-Z2 1039.9005.02
GSM
TEST SIM
2
DEF
3
GHI 1
ABC
5 6 4
8
ÜVW 7
STU
.
-
0
9
XYZ
S C RCL M
Step 2
Insert test SIM card of the right
format into the mobile. ,
Note:
Network SIM cards prohibit
measurement of the bit error rate.
The Autotest can therefore only be
carried out fully if a test SIM card
is used.