Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 218 / 374

List of Commands/Annex C CTS55
1094.0006.55 C.14 E-8
1.2.4 Call Set-up and Release
Call set-up from the CTS to the mobile (call)
Syntax: PROCedure:CALL:TOMS
State: MSYN Option: none No Query
Call release from the CTS to the mobile (Release)
Syntax: PROCedure:RELease:TOMS
State: MCE Option: none
No Query
Change of channel for TCH
Syntax: PROCedure:SET:ARFCn <numeric_value>
Value range:
GSM: 1 ... 124
*[975 … 1023]
**[955 … 974]
GSM850 128 … 251
DCS1800: 512 ... 885
DCS1900: 512 ... 810
Default: this command takes the current value for the Initial
Channel number (ARFCN) for TCH ( C.7)
State: MCE Option:
none
With query Note :
* Available for Mobile Stations which support E-GSM.
** Available for Mobile Stations which support R-GSM.
Power change (Mobile Station, used timeslot only)
Syntax: PROCedure:SET:POWer:MS <numeric_value>
Value range:
GSM: 5 ... 15* | Power Control Level
GSM850: 5 ... 15* | Power Control Level
DCS1800: 0 ... 13* | Power Control Level
DCS1900: 0 ... 13* | Power Control Level
State: MCE Option: none With Query Note: always returns the power control level (PCL), (N2)
∗
Max values may change for PHASEI and PHASEII mobiles
Power change (CTS) in unused timeslot
Syntax: CONFigure:BSSig:POWer <numeric_value> or
PROCedure:SET:POWer:CMD[:USED] <numeric_value>
Value range: (N3)
State: MCE Option: keine With Query