Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 314 / 374

Windows

Application CTSgo CTS-K6
1079.2001.01 58 E-3
The generator parameter set can be assigned a short name in the input field “Name”. This short name
appears both in the submenu and in the labeling of the buttons of the module test dialog. The
associated network for the parameter set is determined by clicking on “GSM900“, “GSM1800“ and
“GSM1900“. The output attenuation is also included in the parameter set and can be varied in the
respective field.
When the configurations are completed, press OK to send the settings to the CTS. If the current RF
signal of the CTS generator should not be changed, press the Cancel button.
Channel (GSM900) Frequency
-175 875.0 MHz
-174 875.2 MHz
... ...
0 935.0 MHz...
1 935.2 MHz
2 935.4 MHz
... ...
123 959.6 MHz
124 959.8 MHz
... ...
299 994.8 MHz
300 995.0 MHz
GSM 900 channel
Fictitious channel
Channel (GSM1800) Frequency
486 1800.0 MHz
487 1800.2 MHz
... ...
512 1805.2 MHz...
513 1805.4 MHz
... ...
884 1879.6 MHz
885 1879.8 MHz
... ...
1435 1989.8 MHz
1436 1990.0 MHz
GSM 1800 channel
Fictitious channel
Channel (GSM1900) Frequency
-139 1800.0 MHz
-138 1800.2 MHz
... ...
0 1827.8 MHz...
... ...
512 1930.2 MHz...
513 1930.4 MHz
... ...
809 1989.6 MHz
810 1989.8 MHz
811 1990.0 MHz
GSM 1900 Channel
Fictitious channel