Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 157 / 374

CTS55 Test Report Printout
1094.0006.55 10.3 E-5
Dialled number
The telephone number selected in the test step "Call from MS" is shown here. If the CTS initiates the
call this number will be the default value set in the software.
Overview of Measurement steps
The individual test steps are listed again together with the information about whether they have been
correctly executed (OK) or found to be erroneous (Fail). Steps that have been left out are denoted with
"skipped".
Final Conclusion
The overall result of the tests is entered here. The verdict "Test Passed" is given only if all the steps
have passed (OK). The result is however band specific and in the case of a two band test, where there
will be two separate reports printed, each report will have its own final conclusion.
The following two steps relate only to when a two band autotest sequence has been executed. They will
both be skipped in the event of a single band test.
Handover To
Indicates the outcome of the handover attempt to the new GSM band and is only applicable to the first
page of the report.
Handover From
Indicates the outcome of the handover back to the original location update GSM band and is only
applicable to the second page of the report.