Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 367 / 374

CTS-K6 Windows

Application CTSgo
1079.2001.01 111 E-3
16.13 Can Several CTSs be Controlled from a PC ?
Several CTSs can be controlled from a PC if a sufficient number of free serial interfaces is available.
To avoid interactions of the individual interfaces, a separate interrupt has to be used by each interface.
With CTSgo a selection can only be made between the serial interfaces COM1 to COM4. Proper
functioning of the individual CTSgo sessions largely depends on the capacity of the PC used. Note that
during each session the initialization file CTS_GO.INI in the current directory is overwritten. To avoid
this, CTSgo should be copied into several directories and these copies started only once.
16.14 Can CTSgo be Performed in the Background?
CTSgo can be performed in the background without problems. It may happen, however, that the other
programs require so much computing power that serial data transmission is impaired.
16.15 Can Configuration Files be Read or Printed?
Configuration files have the format of Windows 3.x initialization files. Thus they can be read and if
necessary printed. All configuration files are of identical format and available in English irrespective of
the CTSgo version used. Each entry consists of a section designation in square brackets and entries
with values after an equals sign. As is shown in the following example, the values can be directly read.
In the case of some entries, different options are determined by numerical entries.
Other entries are available in coded form. Such entries are described in the following. Individual entries
are OR-linked bit by bit and stored (eg 40
hex
+ 80
hex
= C0
hex
).
[Test Set 1]
GSM 900 TCH Channel=62
[Application Settings] GSM Autotest GSM Module test DECT Autotest
Mode= 1 2 3
[Network] GSM 900 GSM 1800 GSM 1900
Type= 1 2 3
[Connect 1] / [Connect 2] Call from mobile Call from base station (CTS)
Type= 1 2
[Disconnect 1] / [Disconnect 2] Call release from mobile Call release from base station (CTS)
Type= 1 2