Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 304 / 374

Windows

Application CTSgo CTS-K6
1079.2001.01 48 E-3
More reliable results are obtained by increasing the frames and thus the number of bits, but this
extends the measurement time.
Note:
The measurement time for the phase/frequency error measurement also depends on the number of
bursts to be considered.
7.3.3 Select Tests
This command opens the Select Tests dialog window. By checking the respective boxes you decide
whether the call is set up and cleared down once or twice during the test. You also select the number
of test sets used. By default up to six test sets can be selected for each connection. Using the up /
down arrow buttons, you can change the position for the second connection inside the testplan.
Fig.: Select Tests dialog window