Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 264 / 374

Windows

Application CTSgo CTS-K6
1079.2001.01 8 E-3
2.4 Suitable Serial Cables
The CTSgo program and the CTS allow for various settings of data transmission. Depending on the
handshake method used, different conditions have to be met by the cable. Handshake means that the
devices inform each other whether they are ready to receive data. Disabling the handshake function by
setting NONE is not recommended. In the description it is assumed that a 9-contact connector is fitted
at both cable ends.
2.4.1 Cable for Xon/Xoff Protocol
2.4.2 Cable for Hardware Protocol RTS/CTS
2.5 Equipment Supplied for CTS-K6
The GSM Remote Control Option CTS-K6 (Rohde & Schwarz Order No. 1079.2001.01) comprises the
following software components as well as a document with the CTS unblocking code.
•
Data record “CTSgo for Windows 95 / 98 /NT 4.0 “ German version
•
Data record “CTSgo for Windows 95 / 98 /NT 4.0 “ English version
Pin Designation
1 DCD (Data Carrier Detect)
2 RxD (Receive Data)
3 TxD (Transmit Data)
4 DTR (Data Terminal Ready)
5 GND (Ground)
6 DSR (Data Set Ready)
7 RTS (Request To Send)
8 CTS (Clear To Send)
9 RI (Ring Indicator)
Fig.: Pin assignment of
RS-232-C interface
Cable end A Cable end B
Pin 2 (RxD) Pin 3 (TxD)
Pin 3 (TxD) Pin 2 (RxD)
Pin 5 (GND) Pin 5 (GND)
Cable end A Cable end B
Pin 2 (RxD) Pin 3 (TxD)
Pin 3 (TxD) Pin 2 (RxD)
Pin 7 (RTS) Pin 8 (CTS)
Pin 8 (CTS) Pin 7 (RTS)
Pin 5 (GND) Pin 5 (GND)