Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 263 / 374

CTS-K6 Windows

Application CTSgo
1079.2001.01 7 E-3
2 Introduction
We are very pleased to be able to present CTSgo for Windows to you. This program offers
comprehensive capabilities for the remote control of Digital Radio Testers CTS50, CTS55 or CTS65. It
offers in addition an autotest with versatile configurations for GSM and DECT and an interactive
module test for GSM mobile phones. Autotest results are documented in an informative report, which
can be stored and printed.
All brand names and product names in this manual are registered trademarks of the respective
manufacturer or enterprise.
2.1 First Steps with CTSgo
The best way to get familiar with a program is learning by doing, ie to utilize the functions and practice
their application. New users of CTSgo are advised to read carefully through the manual or to use the
online help provided by the program. A section of this manual also gives practical hints and examples
on the use of CTSgo.
2.2 Basic Knowledge Required
Before using CTSgo, you should be familiar with the basic operation of Microsoft Windows. This
means that you should be able to open and close a Windows application program and know how to
use the mouse. For more detailed information on Windows refer to the Microsoft Windows user
manual.
2.3 Preconditions for System Use
The CTSgo program comes in a version for use under Windows 95, Windows 98 or Windows NT 4.0.
The program may be installed in German or English as desired. More information is given in the
Program Installation Section.
To ensure unimpaired functioning of CTSgo, your system should meet the following basic
requirements. For a more convenient use of CTSgo, particularly the presentation of measurement
reports, the employed graphics card should have a better resolution than the one specified below.
CTS30, CTS50, CTS55 or CTS65 is also required. To be able to make full use of all the program
capabilities, software version 2.00 or higher should be installed on the CTS. The autotest can be
performed as of software version 1.25 of the CTS. A test SIM card (eg Rohde & Schwarz CRT-Z2,
Order Number 1039.9005.02) is also required.
A serial cable should be used for connecting your PC to the CTS. Suitable cables are described in the
following section.
Platform: Windows 95 / Windows 98 / Windows NT 4.0
Processor: Pentium 166
RAM: 16 MByte
Display: VGA 640x480 pixels
Hard-disk storage: 5 MByte
Peripherals: Mouse, one free serial interface