manualshive.com logo in svg

Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Этот Rohde & Schwarz 1094.0006.50 - идеальное устройство для профессиональной работы. У вас есть доступ к операционному руководству, которое можно бесплатно загрузить с manualshive.com, чтобы освоить все функции этого прибора. Приобретайте и наслаждайтесь удобством этого устройства прямо сейчас!

Поделиться
Скачать
background image

CTS55 

Test Report Printout 

1094.0006.55 10.5 

E-5 

 

 
 

          +--------------------------------------------------------------------+ 
          | The Well Known Mobile Phone Company Limited - GSM Mobile Test      | 
          | Test Station:                      CTS55  Rohde & Schwarz          | 
          | Page:                              2                               | 
          | Date:                              27.09.1994                      | 
          | Time:                              12:06                           | 
          +--------------------------------------------------------------------+ 
          | Measurement results on channel:  124                               | 
          | MS Output Power:                                                   | 
          |   Standard [dBm]  Measured [dBm]  Tolerance [dBm]       Evaluation | 
          |        13             13.9            8...18                    OK | 
          |        23             26.3           18...28                    OK | 
          |        33             36.0           28...38                    OK | 
          |                                                                    | 
          | MS Sensitivity:                                                    | 
          | Input Level  RXLEV    Allowed     RXQUAL   Maximum      Evaluation | 
          |    [dBm]     [dBm]     [dBm]       [%]       [%]                   | 
          |    -100       -99   -105..<-95     0.1       0.4                OK | 
          |                                                                    | 
          | Power Ramp:                                                        | 
          |   Standard   Average Power   Tolerance        Ramp      Evaluation | 
          |    [dBm]         [dBm]         [dBm]     Rise/Mid./Fall            | 
          |      13            9.9       9.5...16.5  FAIL/ OK / OK          OK | 
          |                                                                    | 
          | Phase/Frequency:                                                   | 
          |   Standard [dBm]  Phase Error [deg]   Maximum [deg]     Evaluation | 
          |        23            2.1 (RMS)         10.6 (RMS)               OK | 
          |                      7.6 (Peak)        25.7 (Peak)              OK | 
          |                    Freq Error [Hz]    Maximum [Hz]                 | 
          |                         972               999                   OK | 
          |                                                                    | 
          | Bit Error Rate:                                                    | 
          | Input Level [dBm]    RBER [%]         Maximum [%]       Evaluation | 
          |        -90        11.4 (Class II)   12.3 (Class II)             OK | 
          |                   14.9 (Class IB)   19.8 (Class IB)             OK | 
          | Number of Frames     FER [%]          Maximum [%]                  | 
          |         7             15.0               17.8                   OK | 
          +--------------------------------------------------------------------+ 

 

 
 

 

          +--------------------------------------------------------------------+ 
          | The Well Known Mobile Phone Company Limited - GSM Mobile Test      | 
          | Test Station:                      CTS55  Rohde & Schwarz          | 
          | Page:                              3                               | 
          | Date:                              27.09.1994                      | 
          | Time:                              12:06                           | 
          +--------------------------------------------------------------------+ 
          |                 Overview Of Measurement Steps:                     | 
          | Location Update:                                                OK | 
          | Call To MS:                                                     OK | 
          | Echo Test:                                                      OK | 
          | MS Release:                                                     OK | 
          | Call From MS:                                                   OK | 
          | Network Release:                                                OK | 
          | MS Power 1st Channel:             1                             OK | 
          | Sensitivity 1st Channel:          1                             OK | 
          | Power Ramp 1st Channel:           1                             OK | 
          | Phase/Frequency 1st Channel:      1                             OK | 
          | Bit Error Rate 1st Channel:       1                             OK | 
          | MS Power 2nd Channel:           124                             OK | 
          | Sensitivity 2nd Channel:        124                             OK | 
          | Power Ramp 2nd Channel:         124                             OK | 
          | Phase/Frequency 2nd Channel:    124                             OK | 
          | Bit Error Rate 2nd Channel:     124                             OK | 
          +--------------------------------------------------------------------+ 
          | Final Conclusion                                       Test passed | 
          +--------------------------------------------------------------------+

 

 

Содержание 1094.0006.50























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 1094.0006.50

GBC AIO Quick Start Manual preview
AIO
Бренд: GBC Страницы: 8
KAPSCH T600 Operator And Maintenance Manual preview
T600
Бренд: KAPSCH Страницы: 57
Raytheon V700 Instruction Manual preview
V700
Бренд: Raytheon Страницы: 69
Galaxy Audio RM2 Operation Manual preview
RM2
Бренд: Galaxy Audio Страницы: 24
ACCO Brands LOUDEN 200 Series Installation, Operation, Maintenance And Parts Manual preview
LOUDEN 200 Series
Бренд: ACCO Brands Страницы: 144
B&K 4416 Service Manual preview
4416
Бренд: B&K Страницы: 16
B&G H5000 Pilot Quick Reference Manual preview
H5000 Pilot
Бренд: B&G Страницы: 2
Cameo SCUBA User Manual preview
SCUBA
Бренд: Cameo Страницы: 64
Cameo OPUS Series User Manual preview
OPUS Series
Бренд: Cameo Страницы: 100
CAME PXTS4.3 Installer Manual preview
PXTS4.3
Бренд: CAME Страницы: 32
H&S 5126 Operator'S Manual preview
5126
Бренд: H&S Страницы: 42
Tanaka APM-7 Instruction Manual preview
APM-7
Бренд: Tanaka Страницы: 20
Tandem AutoSoft 90 Indications For Use preview
AutoSoft 90
Бренд: Tandem Страницы: 80
Tanco E100 SA Quick Reference Manual preview
E100 SA
Бренд: Tanco Страницы: 4
Gardena 1815 Operating Instructions Manual preview
1815
Бренд: Gardena Страницы: 33
Backyard Adventures Playcenter Belmont Owners Manual And Assemly Instruction preview
Belmont
Бренд: Backyard Adventures Playcenter Страницы: 33
A.HABERKORN KS 45 Instructions For Use And Test Manual preview
KS 45
Бренд: A.HABERKORN Страницы: 28
JBM 54172 Instruction Manual preview
54172
Бренд: JBM Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды