Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 56 / 374

Test Sequence CTS55
1094.0006.55 4.4 E-6
MS Type Details Menu
The „Autotest Running“ menu displayed in Autotest when the „Start“ key is pressed, is determined by
the band settings of the currently selected band within the „Handover Details“ menu. This menu can be
selected from within the main configuration menu.
Config – Select Menu Handover Details Menu
Depending on how the instrument has been configured will determine which of the two „Autotest
Running“ menus will be displayed when the Autotest sequence is initiated. The above menu setting
indicates that the instrument is currently configured to use the GSM 900 band as the location update
band. Any handover attempt will be made to the GSM 1800 band.
Hint:
If a single band mobile is to be tested, then it is necessary to disable any handover steps being
attempted. This can be achieved from the general “Config – Select” Menu, within "Handover Details" by
changing the “Network Switch” to the single band setting.
If a single band mobile is tested with an instrument that has been configured to support handover, then
Autotest will fail the handover step and ultimately fail the complete test.