Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 305 / 374

CTS-K6 Windows

Application CTSgo
1079.2001.01 49 E-3
7.3.4 First Connect
This command permits to define the method for the first call setup. To this end, select whether the
CTSgo program expects a call from the mobile or whether the call should be set up by the CTS. In the
case of a mobile call, you can define an expected numerical entry, which will then be compared with
the call number received and evaluated in the test report. Thus the number keys of the mobile can also
be easily checked.
Note:
This command can only be selected if the first connection is activated for the test.
7.3.5 Test Set 1
You can decide for each test set which measurements should be performed in a traffic channel (TCH).
To do so enter the TCH to be used in the first entry field. Select the measurements to be performed
from the list at the right. Enter the RF output power of the CTS (BS power) for the individual tests in
the entry fields “Standard“ and “BER“.
Fig.: Configure first Connect dialog window