Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 130 / 374

Description of the Menus CTS55
1094.0006.55 9.22 E-7
If the Dual Band Options have been selected in the Handover Details Menu (See Section 9.7.4.1 and
9.9.13) then a Fourth Option Handover is available in the Ramp, Phase/Freq and BER menu bar. This
option is needed to initiate a “Handover” to the selected network.
If the CTS is configured to In-Band channel changes, then NO handover option will be available in the
measurement bar.
When selected the Start Measure button will display the following text:
Network GSM900 Display Text
GSM900/GSM1800 Handover to 1800.
GSM900/GSM1900 Handover to 1900.
Multi Handover Option Available.
If MS GSM900/GSM1800 dual band – Handover to 1800.
If MS GSM900/GSM1900 dual band – Handover to 1900.
Network GSM1800
GSM1800/GSM900 Handover to 900.
Multi Handover Option Available - Handover to 900.
Network GSM1900
GSM1900/GSM900 Handover Option Available.
Handover to 900.
Multi Handover Option Available - Handover to 900.
The target ARFCN channel and Power Ctrl Level will be the channel and power level set in the main
configuration settings for that network (Section 9.9.2 Config BS Signal). For further subsequent
handovers the last applied ARFCN and power level will be used.
Call Release
By pressing this key the connection will be released by the CTS. The CTS returns to the MS Test
Updated Menu, from where a new call can be established.
Ctrl Level
By pressing this key the Power Ctrl Level of the mobile station can be changed. After the new value has
been entered and confirmed the CTS forces the change of the transmitted power by signalling of the
mobile station.
Rf Chan
By pressing this key the traffic channel number can be changed.
Tune BS-Sig
By pressing this key the power level transmitted by the CTS can be changed.
Start Measure
With this key the selected measurement (see Measure Select) can be activated.
Measure Select
With this key one of the more detailed measurements can be selected. To activate the measurement
the "Start Measure" key has to be pressed.