Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 187 / 374

CTS55 Software Options
1094.0006.55 12.3 E-3
12.4 Setting the Code Number to enable an option
First enter the "Enable S/W Options" menu via the main configuration menu. If you have just set the
serial number you will already be in this menu.
If the serial number is available then it will be shown on the menu, as below. If it is not available then
you must enter it as described in section 12.3.
Enable S/W Options Menu (Test Disabled)
Choose the software option you want to enable using the arrow softkeys. Press the "Enable" button to
enter the "Code Number" menu for that particular option.
Code Number Menu
The code number required can be obtained from your local Rohde & Schwarz sales office. The number
supplied should be entered via the softkeys.
Once the code number has been successfully entered, the state of the option will be "Enabled" in the
"Enable S/W Options" menu and the "Enable" button will disappear.