Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 220 / 374

List of Commands/Annex C CTS55
1094.0006.55 C.16 E-8
1.4 RF Generator Settings
Channel number
Syntax:
CONFigure:RFGen:CHANnel[:CW| <numeric_value>
Value range: GSM: -175 ... 300
GSM850: 127... 252
DCS1800: 511... 1436
DCS1900: -139 ... 811
Default: GSM: 1
GSM850 : 127
DCS1800: 486
DCS1900: 611
State: RFG Option: B7 With Query
Frequency
Syntax: CONFigure:RFGen:FREQuency[:CW|:FIXed] <numeric_value>
Value range:
GSM: 900.0 ... 995.0 MHz (in steps of 0.2 MHz)
GSM850 869.0 … 995.0 MHz (in steps of 0.2 MHz)
DCS1800: 1800.0 ... 1990.0 MHz (in steps of 0.2 MHz)
DCS1900: 1800.0 ... 1990.0 MHz (in steps of 0.2 MHz)
Default: GSM: 935.2 MHz
GSM850 : 869.0 MHz
DCS1800: 1800.0 MHz
DCS1900: 1950.0 MHz
State: RFG Option: B7
With Query
Note: The input value is adapted to the step size indicated when the
parameter is set.
Frequency offset
Syntax: CONFigure:RFGen:FREQuency:OFFSet <numeric_value>
Value range: -100.009 ... 100.009 kHz Default: 0.0 Hz
State: RFG Option: B7 With Query
Type of modulation
Syntax: CONFigure:RFGen:DM:FORMat <value>
Value range: 0 ... 7 Default: 0
State: RFG Option: B7 With Query Note: Modulation must be in state dummy.
Modulation
Syntax: CONFigure:RFGen:DM:MODE <value>
Value range:
OFF No modulation
DUM Dummy burst with selected midamble
OFF No modulation
Default: DUM
State: RFG Option: B7
With Query