Rohde & Schwarz 1094.0006.50, Руководство по эксплуатации

Страница: 309 / 374

CTS-K6 Windows

Application CTSgo
1079.2001.01 53 E-3
7.3.15 Test Set 9
You can determine the measurements to be performed in the selected TCH channel. For details refer
to the description under Test set 1.
Note:
This command can only be selected if test set 9 is activated for the test.
7.3.16 Test Set 10
You can determine the measurements to be performed in the selected TCH channel. For details refer
to the description under Test set 1.
Note:
This command can only be selected if test set 10 is activated for the test.
7.3.17 Test Set 11
You can determine the measurements to be performed in the selected TCH channel. For details refer
to the description under Test set 1.
Note:
This command can only be selected if test set 11 is activated for the test.
7.3.18 Test Set 12
You can determine the measurements to be performed in the selected TCH channel. For details refer
to the description under Test set 1.
Note:
This command can only be selected if test set 12 is activated for the test.
7.3.19 Second Disconnect
Using this command you can determine the procedure for the second call clear-down. Select by a click
on the respective box whether a call release is expected from the mobile or whether the call should be
cleared down by the CTS.
Note:
This command can only be selected if the second connection is activated for the test.