ALGO® 5 Newborn Hearing Screener Service Manual
P/N 000995 Rev.A
1
ALGO 5 Installation and Assembly Instructions
1. Preparation
Examine the shipping containers carefully upon receipt. If any of the boxex are damaged or
the packing materials show signs of stress, notify the carrier and keep the shipping materials
for the carrier’s inspection.
The ALGO 5 includes these items packaged and shipped separately in 4 boxes::
•
Cart base with Isolation Transformer
•
Cart column (with cable guide protective covers included but not installed)
•
Panel PC with Panel PC power supply
•
Accessories box: keyboard, DSP Box, Preamp 5, ATA 5 cable, Sample Pack, label
printer, and accessories pack: Equipment Check Kit, USB Cable, two PCA 5 cables,
CD, power cord, and documentation package
•
Optional items packaged separately: Barcode scanner, LAN Isolator, and page
printer.
Note:
Save shipping boxes and packing foam in the event that the screening module
must be returned to the manufacturer.
Required Tools
•
T-handle allen wrench, 3/16” (supplied, in Cart Base packaging)
•
90 degree allen wrench, 1/8” and 5/32” (supplied, in Cart Column packaging)
•
7/16” standard wrench or adjustable crescent wrench (not supplied)
•
Phillips
screwdriver
(not
supplied)
Hardware Supplied
•
Socket head screws (#1/4-20 x 1 1/4”) with lock washers & flat washers (4, in Cart
Base packaging)
•
KEP nuts (#1/4-20) – (2, in Cart Base packaging)
•
Socket head cap screws (#10-32 x 1/2” SHCS) - (4, in Cart Column packaging)
•
Pan head screws (#10-32 x 3/8” PHMS) - (4, packaged separately, taped to DSP
bracket on Cart Column)
•
Post cap plate – (1, in Cart Column packaging)
•
Button head socket cap screws (#1/4-20 x 3/8” BHSCS) – (4, packaged with post cap
plate)
