R&S FSW Series, Руководство пользователя

Страница: 264 / 1450

Measurements and Results
R&S
®
FSW
264 User Manual 1173.9411.02 ─ 43
Standard files for sub blocks (Multi-SEM measurements)
If more than one sub blocks are defined, the "Standard Files" tab and softkey are not
available. To load a standard file for an individual sub block, use the
Standard / MSR
Settings setting in the "Sub Blocks" tab.
Selecting Storage Location - Drive/ Path/ Files ...........................................................264
File Name ....................................................................................................................264
Load Standard .............................................................................................................264
File Explorer ................................................................................................................ 264
Save Standard ............................................................................................................ 265
Delete Standard .......................................................................................................... 265
Restore Standard Files ............................................................................................... 265
Selecting Storage Location - Drive/ Path/ Files
Select the storage location of the file on the instrument or an external drive.
The default storage location for the SEM settings files is:
C:\Program Files (x86)\Rohde-Schwarz\FSW\<version>\sem_std
.
Note: Saving instrument settings in secure user mode.
In secure user mode, settings that are stored on the instrument are stored to volatile
memory, which is restricted to 256
MB. Thus, a "memory limit reached" error can occur
although the hard disk indicates that storage space is still available.
To store data permanently, select an external storage location such as a USB memory
device.
For details, see
Chapter 5.1.7, "Protecting Data Using the Secure User Mode" ,
on page 43.
Remote command:
MMEMory:CATalog
on page 1229
File Name
Contains the name of the data file without the path or extension.
By default, the name of a user file consists of a base name followed by an underscore.
Multiple files with the same base name are extended by three numbers, e.g.
limit_lines_005
.
File names must be compatible with the Windows conventions for file names. In partic-
ular, they must not contain special characters such as ":", "*", "?".
For details on the filename and location, see Chapter 11.3.2.2, "Storage Location and
Filename" , on page 629.
Load Standard
Loads the selected measurement settings file.
Remote command:
[SENSe:]ESPectrum<sb>:PRESet[:STANdard]
on page 918
File Explorer
Opens the Microsoft Windows File Explorer.
Spectrum Emission Mask (SEM) Measurement