R&S FSW Series, Руководство пользователя

Страница: 918 / 1450

Remote Commands
R&S
®
FSW
918 User Manual 1173.9411.02 ─ 43
14.5.7.1 Managing Measurement Configurations
The following commands control measurement configurations for SEM measurements.
CALCulate<n>:LIMit<li>:ESPectrum<sb>:RESTore
............................................................918
[SENSe:]ESPectrum<sb>:PRESet[:STANdard]
................................................................. 918
[SENSe:]ESPectrum<sb>:PRESet:RESTore
..................................................................... 918
[SENSe:]ESPectrum<sb>:PRESet:STORe
....................................................................... 919
CALCulate<n>:LIMit<li>:ESPectrum<sb>:RESTore
This command restores the predefined limit lines for the selected Spectrum Emission
Mask standard.
All modifications made to the predefined limit lines are lost and the factory-set values
are restored.
Suffix:
<n>
.
irrelevant
<li> irrelevant
<sb> irrelevant
Example: CALC:LIM:ESP:REST
Resets the limit lines for the current Spectrum Emission Mask
standard to the default setting.
[SENSe:]ESPectrum<sb>:PRESet[:STANdard] <Standard>
This command loads a measurement configuration.
Standard definitions are stored in an xml file. The default directory for SEM standards
is
C:\R_S\INSTR\sem_std
.
Suffix:
<sb>
.
1 to 8
Sub block in a Multi-SEM measurement
Parameters:
<Standard> String containing the file name.
If you have stored the file in a subdirectory of the directory men-
tioned above, you have to include the relative path to the file.
Manual operation: See "Standard / MSR Settings" on page 257
See "Load Standard" on page 264
[SENSe:]ESPectrum<sb>:PRESet:RESTore
This command restores the default configurations of predefined SEM standards.
Note that the command will overwrite customized standards that have the same name
as predefined standards.
Configuring and Performing Measurements