R&S FSW Series, Руководство пользователя

Страница: 257 / 1450

Measurements and Results
R&S
®
FSW
257 User Manual 1173.9411.02 ─ 43
Sub Block Count ......................................................................................................... 257
Sub Block / Center Freq ..............................................................................................257
Standard / MSR Settings .............................................................................................257
Edit Sweep List ........................................................................................................... 257
Sub Block Count
Defines the number of sub blocks. By default, the familiar SEM measurement with just
one single block of ranges is configured.
Remote command:
[SENSe:]ESPectrum<sb>:SCOunt
on page 920
Sub Block / Center Freq
Defines the center frequency for an individual sub block. The center frequency deter-
mines the reference range used for each block.
For measurements with only one sub block, this setting corresponds to the global set-
ting in the "Frequency" settings (see
Center Frequency ).
Remote command:
[SENSe:]ESPectrum<sb>:SCENter
on page 920
Standard / MSR Settings
Defines the use of a standard settings file or a multi-standard radio configuration for a
particular sub block. For details, see
Chapter 7.6.5.6, "Standard Files" , on page 263
and Chapter 7.6.5.5, "MSR Settings" , on page 260.
Note that either a standard or an MSR setting can be selected; if one is selected, the
other is disabled.
Remote command:
[SENSe:]ESPectrum<sb>:PRESet[:STANdard]
on page 918
Chapter 14.5.7.3, "Configuring a Multi-SEM Measurement" , on page 920
Edit Sweep List
Switches to the "Sweep List" tab of the "Spectrum Emission Mask" dialog box to con-
figure the individual frequency ranges and mask limits for the corresponding sub block.
See
Chapter 7.6.5.1, "Sweep List" , on page 251.
Spectrum Emission Mask (SEM) Measurement