R&S FSW Series, Руководство пользователя, Страница: 919 / 1450

Remote Commands
R&S
®
FSW
919 User Manual 1173.9411.02 ─ 43
Suffix:
<sb>
.
1 to 8
Sub block in a Multi-SEM measurement
Manual operation: See "Restore Standard Files" on page 265
[SENSe:]ESPectrum<sb>:PRESet:STORe <Standard>
This command saves the current SEM measurement configuration.
Standard definitions are stored in an xml file. The default directory for SEM standards
is
C:\R_S\INSTR\sem_std
.
Suffix:
<sb>
.
1 to 8
Sub block in a Multi-SEM measurement
Parameters:
<Standard> String containing the file name.
You can save the file in a subdirectory of the directory men-
tioned above. In that case, you have to include the relative path
to the file.
Manual operation: See "Save Standard" on page 265
14.5.7.2 Controlling the Measurement
The following commands control the measurement itself.
INITiate<n>:ESPectrum
.................................................................................................. 919
[SENSe:]SWEep:MODE
................................................................................................. 919
INITiate<n>:ESPectrum
This command initiates a Spectrum Emission Mask measurement.
Suffix:
<n>
.
irrelevant
[SENSe:]SWEep:MODE <Mode>
This command selects the spurious emission and spectrum emission mask measure-
ments.
You can select other measurements with
●
CALCulate<n>:MARKer<m>:FUNCtion:POWer<sb>[:STATe]
Parameters:
<Mode> LIST | AUTO | ESPectrum
AUTO
Turns on basic spectrum measurements.
ESPectrum
Turns on spectrum emission mask measurements.
Configuring and Performing Measurements