R&S FSW Series, Руководство пользователя

Страница: 967 / 1450

Remote Commands
R&S
®
FSW
967 User Manual 1173.9411.02 ─ 43
CALC:PSE:SUBR 10
//Sets 10 peaks per range to be stored in the list.
//--------------Performing the Measurement-----
INIT:SPUR; *WAI
//Performs a spurious emission measurement and waits until the sweep has finished.
//---------------Retrieving Results-------------
CALC:LIM1:FAIL?
//Queries the result of the check for limit line 1.
TRAC? SPUR
//Queries the peak list of the spurious emission measurement.
14.5.9 Analyzing Statistics (APD, CCDF)
All remote control commands specific to statistical measurements are described here.
● Activating Statistical Measurements ..................................................................... 967
● Configuring Statistical Measurements ...................................................................968
● Using Gate Ranges for Statistical Measurements ................................................ 969
● Scaling the Diagram ..............................................................................................971
● Performing a Statistical Measurement .................................................................. 974
● Retrieving Results .................................................................................................974
● Programming Example: Measuring Statistics ....................................................... 975
14.5.9.1 Activating Statistical Measurements
The following commands activate statistical measurements.
CALCulate<n>:STATistics:APD[:STATe]
............................................................................967
CALCulate<n>:STATistics:CCDF[:STATe]
......................................................................... 967
CALCulate<n>:STATistics:APD[:STATe] <State>
This command turns the APD measurement on and off.
Suffix:
<n>
.
Window
Parameters:
<State> ON | OFF | 1 | 0
*RST:
0
Example: CALC:STAT:APD ON
Switches on the APD measurement.
CALCulate<n>:STATistics:CCDF[:STATe] <State>
This command turns the CCDF on and off.
Configuring and Performing Measurements