R&S FSW Series, Руководство пользователя

Страница: 887 / 1450

Remote Commands
R&S
®
FSW
887 User Manual 1173.9411.02 ─ 43
MSR Channel Names
The functions for manual operation are described in Chapter 7.2.5.5, "MSR Channel
Names" , on page 193.
[SENSe:]POWer:ACHannel:NAME:GAP<gap>
..................................................................887
[SENSe:]POWer:ACHannel:NAME:UACHannel
................................................................ 887
[SENSe:]POWer:ACHannel:NAME:UALTernate<ch>
......................................................... 887
[SENSe:]POWer:ACHannel:SBLock<sb>:NAME[:CHANnel<ch>]
........................................887
[SENSe:]POWer:ACHannel:NAME:GAP<gap> <Name>
This command queries the name of the GAP channel.
Suffix:
<gap>
.
1 | 2
Gap (CACLR) channel number
Parameters:
<Name> String containing the name of the channel
*RST:
'Gap1', 'Gap2'
[SENSe:]POWer:ACHannel:NAME:UACHannel <Name>
This command defines the name for the upper adjacent channel in asymmetrical MSR
channel definitions. To define the name for the lower adjacent channel use the
[SENSe:]POWer:ACHannel:NAME:ACHannel
command.
Parameters:
<Name> String containing the name of the channel
*RST:
ADJ
[SENSe:]POWer:ACHannel:NAME:UALTernate<ch> <Name>
This command defines the name for the specified upper alternate channel in asymmet-
rical MSR channel definitions. To define the name for the lower adjacent channels use
the
[SENSe:]POWer:ACHannel:NAME:ALTernate<ch>
command.
Suffix:
<ch>
.
1..n
Alternate channel number
Parameters:
<Name> String containing the name of the channel
*RST:
ALT<1...11>
[SENSe:]POWer:ACHannel:SBLock<sb>:NAME[:CHANnel<ch>] <Name>
This command defines the name of the specified MSR Tx channel.
This command is for MSR signals only.
Configuring and Performing Measurements