R&S FSW Series, Руководство пользователя

Страница: 1117 / 1450

Remote Commands
R&S
®
FSW
1117 User Manual 1173.9411.02 ─ 43
Example: PMET2:TRIG:HYST 10
Sets the hysteresis of the trigger to 10 dB.
Manual operation: See "Hysteresis" on page 379
[SENSe:]PMETer<p>:TRIGger:LEVel <Level>
This command defines the trigger level for external power triggers.
Suffix:
<p>
.
Power sensor index
Parameters:
<Level> -20 to +20 dBm
Range:
-20 dBm to 20 dBm
*RST: -10 dBm
Default unit: DBM
Example: PMET2:TRIG:LEV -10 dBm
Sets the level of the trigger
Manual operation: See "External Trigger Level" on page 378
[SENSe:]PMETer<p>:TRIGger:SLOPe <Edge>
This command selects the trigger condition for external power triggers.
Suffix:
<p>
.
Power sensor index
Parameters:
<Edge> POSitive
The measurement starts in case the trigger signal shows a posi-
tive edge.
NEGative
The measurement starts in case the trigger signal shows a neg-
ative edge.
*RST:
POSitive
Example: PMET2:TRIG:SLOP NEG
Manual operation: See "Slope" on page 379
[SENSe:]PMETer<p>:TRIGger[:STATe] <State>
This command turns the external power trigger on and off.
Suffix:
<p>
.
Power sensor index
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
Setting Basic Measurement Parameters