R&S FSW Series, Руководство пользователя

Страница: 778 / 1450

Network and Remote Operation
R&S
®
FSW
778 User Manual 1173.9411.02 ─ 43
Settings
Some additional settings are available to configure the exported SCPI command files.
Add Synchronization Commands ← Settings
If enabled, additional commands are included in the script to synchronize the recorded
commands when necessary. For instance, when a measurement is started, a
*WAI
command is inserted to ensure that the next command is only executed after the mea-
surement has finished.
Combined Recording of Spectrum Analyzer and R&S Signal Generator ← Set-
tings
Records commands both from the R&S FSW and from a connected R&S signal gener-
ator.
IP Address or Computer name of Signal Generator ← Settings
The IP address or computer name of the signal generator connected to the R&S FSW
via LAN.
For tips on how to determine the default computer name, see Chapter 5.1.5.3, "Using
Computer Names" , on page 41, or the signal generator's user documentation.
By default, the IP address is expected. To enter the computer name, toggle the
"123"/"ABC" button to "ABC".
Note: While a connection to a signal generator is established, you cannot change the
connection information.
The IP address / computer name is maintained after a [PRESET], and is transferred
between applications. However, when you switch applications, the control is disabled in
the other applications. Only one application can control a generator at any time.
Select
"Test Connection" on page 711 to establish a temporary connection from the
R&S FSW to the specified signal generator.
If a connection to a signal generator is already configured, the connection data is provi-
ded for information only.
Automating Tasks with Remote Command Scripts