R&S FSW Series, Руководство пользователя

Страница: 1304 / 1450

Remote Commands
R&S
®
FSW
1304 User Manual 1173.9411.02 ─ 43
Manual operation: See "Save Device Footprint" on page 713
SYSTem:ERRor:CLEar:REMote
This command deletes all contents of the "Remote Errors" table.
Note: The remote error list is automatically cleared when the R&S FSW is shut down.
Example: SYST:ERR:CLE:REM
Manual operation: See "Display Remote Errors" on page 789
See "Clear Error List" on page 796
SYSTem:ERRor:EXTended? <MessageType>[, <ChannelName>]
This command queries all system messages, or all messages of a defined type, dis-
played in the status bar for a specific channel (application).
Note: This command queries the strings displayed for manual operation. For remote
programs, do not define processing steps depending on these results. Instead, query
the results of the
STATus:QUEStionable:EXTended:INFO
status register, which
indicates whether messages of a certain type have occurred (see "STATus:QUEStiona-
ble:EXTended:INFO Register" on page 761).
Parameters:
<MessageType> ALL | INFO | WARNing | FATal | ERRor | MESSage
<ChannelName> String containing the name of the channel.
The parameter is optional. If you omit it, the command works for
the currently active channel.
Return values:
<Messages> String containing all messages of the selected type for the speci-
fied channel. Each message is separated by a comma and
inserted in parentheses. If no messages are available, empty
parentheses are returned.
Example: SYST:ERR:EXT? ALL
Returns all messages for the currently active application, e.g.
"Message 1","Message 2" .
Example: SYST:ERR:EXT? FAT,'Spectrum2'
Queries fatal errors in the 'Spectrum2' application. If none have
occurred, the result is:
" " .
Usage: Query only
SYSTem:ERRor:LIST? [<MessType>]
This command queries the error messages that occur during R&S FSW operation.
Query parameters:
<MessType> SMSG | REMote
Configuring the R&S FSW