R&S FSW Series, Руководство пользователя

Страница: 761 / 1450

Network and Remote Operation
R&S
®
FSW
761 User Manual 1173.9411.02 ─ 43
Table 13-12: Meaning of the bits used in the STATus:QUEStionable:EXTended register
Bit No. Meaning
0 not used
1 INFO
This bit is set if a status message is available for the application.
Which type of message occurred is indicated in the STATus:QUEStionable:EXTended:INFO
Register .
2 to 14 Unused
15 This bit is always 0.
STATus:QUEStionable:EXTended:INFO Register
The
STATus:QUEStionable:EXTended:INFO
register contains information on the
type of messages that occur during operation of the R&S FSW. A separate
INFO
regis-
ter exists for each active channel.
You can read out the register with
STATus:QUEStionable:EXTended:INFO:
CONDition?
or
STATus:QUEStionable:EXTended:INFO[:EVENt]?
. You can
query all messages that occur for a specific channel using the command
SYSTem:
ERRor:EXTended?
on page 1304.
Table 13-13: Meaning of the bits used in the STATus:QUEStionable:EXTended:INFO register
Bit No. Meaning
0 MESSage
This bit is set if event or state has occurred that may lead to an error during further operation.
1 INFO
This bit is set if an informational status message is available for the application.
2 WARNing
This bit is set if an irregular situation occurs during measurement, e.g. the settings no longer
match the displayed results, or the connection to an external device was interrupted temporarily.
3 ERRor
This bit is set if an error occurs during a measurement, e.g. due to missing data or wrong set-
tings, so that the measurement cannot be completed correctly.
4 FATal
This bit is set if a serious error occurs in the application and regular operation is no longer possi-
ble.
5 to 14 Unused
15 This bit is always 0.
STATus:QUEStionable:FREQuency Register
The STATus:QUEStionable:FREQuency register contains information about the condi-
tion of the local oscillator and the reference frequency. A separate frequency register
exists for each active channel.
Remote Control Basics