QuVIS Acuity, Руководство пользователя

Страница: 73 / 200

LOCAL/REMOTE switch
This button engages remote control (remote control settings can be selected from the Setup Serial menu page).
Click to toggle local or remote control.
VTR Lockout switch
When on, this button locks out the VTR transport buttons, a useful feature when you want to work with the unit in an
uninterrupted manner. Note that this button is an advanced control whose access can be limited. If the button
cannot be selected, the Advanced Feature in GUI button on the
Setup Config menu will unlock it.
User Login and Audio Section
User Login indicators
These indicators illuminate in order to show when a user or application has logged into the system. If the indicator is
lit, click on the indicator to display network connection information (including IP address and user).
[L] – Indicates a user has logged in from the GUI
[F] – Indicates a user has opened an FTP session
[T] – Indicates a user has opened a Telnet session
[A] – Indicates that an application has opened an API session (e.g. QuVIS QuDAC)
Audio Meters (16)
The audio meters display activity on the active audio channels. If the meter is darkened, then the audio channel has
not been turned on. The audio meter area of the dashboard may be clicked on (using the cursor arrow and the
center touchpad button) to open a large audio meter window and volume control interface. Individual audio channel
volume settings may be set from the large audio meter window.
Audio Channel Pair indicators
When illuminated, [A] or [D] indicates that the pair of channels above the indicator has turned on for recording. [A]
indicates Analog (only available for audio channel 1 and 2). [D] indicates that the selected audio channels will
accept a Digital audio signal (AES/EBU).
If the indicator is green, the channels are ON for recording. If red, then they are ON but no signal is detected (no
signal is present or it has been since lost/disconnected).
Transport Section
SRC/GEN indicator
This indicator is used to display the status of the input source (SRC) signal while in record mode or the genlock
(GEN) source during playback. During playback, the indicator may change from green to red to indicate that
genlock has been lost (or lost and resumed).
If the source or reference has been regained this indicator may be reset, changed back to green, by placing the
cursor over the item and pressing the middle touchpad button.
Colorspace indicator
Displays the input (record) and output (play) colorspace as defined by the user-selectable Input (Record Video
menu page) and Output (Play Video menu page) colorspace settings.
QuVIS Acuity
™
Page 72 QSR Version 3.3