QuVIS Acuity, Руководство пользователя

Страница: 12 / 200

Recommended Equipment Location
Physical Location
This product should be mounted upright on a desk, table or in an equipment rack using the optional rack mount kit.
•
When locating this product on a desk or table, do not place it on either of its sides, or upside down. Ensure that the
table or desk is capable of supporting the weight of this unit (50lbs) plus the weight of any additional equipment that
is located with it. The shipping case of this unit is not designed to support any external loads; do not place any
equipment on top of this product.
•
When mounting this product in a rack, be sure that the rack and corresponding support components are capable of
supporting the weight of this unit (50lbs) plus any additional equipment that is placed in or on the rack. Placement of
this unit in a rack should be such that the rack’s mechanical operation (loading and unloading) does not cause the
rack or this product to fall. Use only those rack mount components approved for use with this product by QuVIS,
Inc.
Ambient temperature and airflow
The manufacturer’s rated operating ambient temperature range for this product, assuming unimpeded airflow of four
to eight meters/sec provided by the internal cooling fans, is 15
°
C to 45
°
C.
Failure to provide for adequate airflow into and out of this product, or operating this product outside the
recommended ambient temperature range, will cause a degradation of performance.
AC Power
Proper operation of this product requires that its AC power source is capable of supplying the AC input
requirements of this product. AC input requirements are listed on a label on the back of the unit next to the power
entry receptacle. Failure to ensure an uninterrupted source of AC power with the necessary capacity may cause a
degradation of performance.
Shielded Cables
Proper operation of this product requires properly shielded cables for fully compliant operation. The use of
unshielded cabling is not recommended.
Certification and Compliances
FCC Emission Control Information (USA only)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense. Changes or
modifications not approved by QuVIS, Inc. can affect emission compliance and could void the user’s authority to
operate this equipment.
QuVIS Acuity
™
Page 11 QSR Version 3.3