QuVIS Acuity, Руководство пользователя

Страница: 122 / 200

SETUP GPI Outputs (6/8) menu page
This menu page allows the operator to program the server to output a GPI signal on the specified channel when a
conditional event is encountered. Depending upon the configuration of the QuVIS Acuity, up to 10 output GPI
channels may be available.
WARNING! If GPI events are used with play scripts (QScripts) then you must ensure that the GPI
settings defined on this menu page do not use the same GPI channel resources as defined within the
script file.
GPI Out Page Menu Item Description
Use this control to instruct the system to output a GPI signal on this channel
when the specified condition is met.
GPI 1
Use this control to instruct the system to output a GPI signal on this channel
when the specified condition is met.
GPI 2
Use this control to instruct the system to output a GPI signal on this channel
when the specified condition is met.
GPI 3
Use this control to instruct the system to output a GPI signal on this channel
when the specified condition is met.
GPI 4
Use this control to instruct the system to output a GPI signal on this channel
when the specified condition is met.
GPI 5-10
GPI Output Options
This GPI mechanism enables you to generate a GPI output signal on a specific GPI channel when the specified
system event is detected. The GPI signal will remain on while the event (such as the unit playing a clip) is active.
None – No action is defined for this GPI output channel.
Fault – When the system detects a “fault” condition, a GPI output signal will be generated on the specified
output channel. This allows the server to signal an external controller or monitoring equipment that a
system fault has occurred.
QuVIS Acuity
™
Page 121 QSR Version 3.3