QuVIS Acuity, Руководство пользователя

Страница: 164 / 200

Load custom settings from a config file
Use the following procedure to load custom settings stored in a previously saved configuration file. All settings will
be applied immediately. To ensure all settings are properly set the Acuity should not be actively playing content
while a config file is being loaded.
1.
Navigate to the Setup Config menu page and click on the Load config file option.
2.
Use the middle touchpad button to select/highlight the config file that contains saved setting to be immediately
applied. The path in the file browser popup window is automatically set to the appropriate directory where all
config files are stored ( /user/cfg ).
3.
Click Load to load the settings stored in the select config file.
Note: If any changes are made to the system settings locally using the GUI or remotely after you have loaded
a configuration, the loaded settings are overwritten for the current session. You may load a config file at any
time although you should avoid doing so during all active playback and record operations.
Restore factory settings
To restore the factory settings, perform the Load custom settings from a config file procedure selecting the
factory.cfg file as the file to be loaded in step 2. Alternately, you may also set the factory.cfg config file as the Set
the Default Startup Config File using the procedure outlined in that section as well.
QuVIS Acuity
™
Page 163 QSR Version 3.3