Oracle X7-8, Руководство по обслуживанию

Страница: 93 / 308

Assign Serial Port Output (Oracle ILOM Web Interface)
->
set /SP/serial/portsharing owner=host
Note -
The serial port sharing value by default is
owner=SP
.
3. Connect a serial host to the server.
Assign Serial Port Output (Oracle ILOM Web Interface)
1. Log in to the SP Oracle ILOM web interface.
To log in, open a web browser and direct it using the IP address of the server SP.
Log in as root or a user with administrator privileges. For more information, see
“Using Oracle
ILOM” in Oracle Server X7-8 Installation Guide .
The Summary Information page appears.
2. Select ILOM Administration → Connectivity from the navigation menu on the left
side of the screen.
3. Select the Serial Port tab.
The Serial Port Settings page appears.
Note - The serial port sharing setting by default is
Service Processor
.
4.
In the Serial Port Settings page, select
Host Server
as the serial port owner.
5.
Click
Save
for the changes to take effect.
6. Connect a serial host to the server.
Ethernet Device Naming
This section contains information about the boot order and device naming for the four 10-
Gigabit Ethernet ports on the back panel of the server. For location information, see “Back
Panel Components” on page 21 . From right to left, the ports are numbered NET 0 to NET 3.
Note -
Naming used by the interfaces might vary from that listed below depending on which
devices are installed in the system.
Troubleshooting and Diagnostics 93