manualshive.com logo in svg

Oracle X7-8, Руководство по обслуживанию

Поделиться
Скачать
Oracle X7-8 Скачать руководство пользователя страница 18

Product Description

Feature

System Component

Six memory controllers are integrated per processor.

Memory DDR4-2666 DIMMs

Up to 96 (8-socket) or 48 (4-socket) DDR4 DIMM slots.

■ RDIMM options: 16 GB, 32 GB
■ LRDIMM option: 64 GB

System Modules (SMODs)

Two SMODs (SMOD0, SMOD1) installed in chassis:

■ Includes internal PCIe Gen3 slot for RAID storage host bus adapter (HBA). Four ports in the

HBA are used for SAS connectivity.

■ One external USB 3.0 port per SMOD
■ Four 10BASE-T ports per SMOD (NET0-3)
■ I/O ports per SMOD: one serial management port (SER MGT), one network management port

(NET MGT, and four 10GBASE-T ports (NET0-3)

Storage Drives (SAS3 HDD/SSD)

Up to eight 2.5-inch hard disk drives (HDDs) or solid state drives (SSDs).

■ Four hot-pluggable SAS3 storage drives per SMOD:
■ SMOD0: bays 0-3; SMOD1: bays 0-3.

PCIe Slots

Sixteen PCIe 3.0 slots (eight x8 slots, eight x16 slots):

■ Each SMOD controls eight PCIe slots.
■ In dual 4-socket mode, each side has four x8 and four x16 PCIe slots.
■ In 8-socket mode, SMOD0 A has eight x8 and eight x16 PCIe slots.
■ Support for eight dual PCIe card carriers (DPCCs), each with two PCIe card slots.

I/O Ports

■ One external RJ-45 serial management (SER MGT) port.
■ One external network management (NET MGT) port.
■ Four 10GBASE-T ports per SMOD (NET0-3).

Power Supplies (PS)

Four 3000W power supplies (PSU0-3)

Two PSUs (PSU2 and 3) power SMOD0, CMOD0-3, DPCC0-3, and FM0-3. The other two PSUs

(PSU0 and 1) power SMOD1, CMOD4-7, DPCC4-7, and FM4-7.

Fan Modules (FM)

Eight fan modules (FM0-7)

Service Processor (SP)

Two integrated Emulex Pilot 4 SPs, one per SMOD, with:

■ IPMI 2.0 compliant remote management capabilities.
■ Oracle Integrated Lights Out Management (ILOM) 4.0 with command-line access using a serial

connection (SER MGT port)

■ Support for Ethernet access to the SP through a dedicated management port (NET MGT port) and

optionally though one of the host Ethernet ports (sideband management).

Management Software

■ Oracle Integrated Lights Out Management (ILOM). Refer to the Oracle ILOM 4.0

Documentation Library at 

http://www.oracle.com/goto/ilom/docs

■ Oracle Hardware Management Pack, available with the Oracle Solaris OS or as a standalone

product with other OS. Refer to the support matrix for specific information 

http://www.oracle.

com/goto/ohmp/docs

Operating Systems and

Virtualization Software

■ Oracle Solaris 11.3 SRU 23
■ Oracle Linux 7.2 and 6.9
■ Oracle VM 3.4.4

18

Oracle Server X7-8 Service Manual • October 2017

Содержание X7-8





















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды